+44(0)1663 767888

Details

The DCM1e microprocessor controlled multi zoner provides any space-conscious sound installation with a high level of flexibility.

The Cloud DCM1e is the new Ethernet version of the popular Cloud DCM1 Digital Control Zone Mixer. The addition of an Ethernet port on the rear panel of the new DCM1e allows this in-built Ethernet web-server to be connected via an RJ-45 socket to an independent or existing wireless router. 

In addition, an ethernet to RS232 bridge may be used to send commands to third-party equipment

These new features mean the new DCM1e can be configured and controlled remotely by any mobile device connected to the network.

Using the web browser of any mobile or fixed device, the end user has "limited installer defined" controls via 4 simple and intuitive interface pages. The Installer has administrator statues via "Configuration Options" which are password protected.

With its flexible routing of line and mic signals, the analogue zoner with its simple-to-use digital control interface, can be controlled remotely via multiple LCD digital controllers.

Optional active input modules extend the flexibility further, with traditional "installer friendly" analogue I/O and signal path, but giving the contractor the flexibility and adaptability of digital control.The traditional simplicity of Cloud products, with far greater functionality.

  • 8 stereo line inputs (1 balanced)
  • 8 balanced line outputs (2 stereo + 6 mono)
  • 4 dedicated ports for optional remote line input modules
  • 4 dedicated ports for optional remote mic input modules
  • Mic paging to all zones with fully programmable override logic
  • Separate analogue paging mic input with contact closure zone selection
  • Separate RJ45 interface for CDPM Series digital paging microphones
  • Supports multiple CDR‑1 Remote Controls (optional) in any wiring configuration
  • CDR‑1 provides local control of source, level, EQ and group enable
  • 2 x 16 character LCD dot-matrix display (both DCM‑1 and CDR‑1)
  • 4 definable zone groups
  • Any line input may have priority in any zone; operation also configurable per-zone
  • Key-protected Installer mode (both DCM‑1 and CDR‑1) prevents user access to configuration menus
  • Inputs, zones and groups can be named RS232 interface for control by third-party control systems
  • Front-panel LEDs confirm remote access
  • Accepts BoseEQ cards
  • No PC required
  • Multiple DCM‑1s may be cascaded for larger systems
  • External Music Mute input for interfacing with emergency systems
  • Any input (mic or line) may be assigned as Emergency Input, overriding Music Mute
  • 2U 19" rack-mounting unit

Additional Information

Line Inputs (8 x stereo)

Frequency Response

20 Hz - 20k Hz ±1 dB

Sensitivity

195 mV (-12 dBu) to 3.1 V (+12 dBu)

Input Impedance

47kΩ

Equalisation

HF: ±14dB/10kHz, MID: ±14dB/1200Hz, LF: ±14dB/50Hz

Mic Inputs (4)

Frequency Response

100Hz / -3dB(filter) to 20kHz ±0.5dB

Gain Range

10dB - 50dB

Input Impedance

>2kΩ (balanced)

Phantom Power

+12V (PCB jumper for on/off)

Equalisation

HF: ±10dB/5kHz, LF: ±10dB/100Hz

Outputs (8 Balanced, 2 stereo + 6 mono)

Balanced Zone Outputs

775mV (0dBu)

Minimum load impedance

600Ω

Maximum output level

+10dBu (2.6V)

External Power Supply

External Supply Input

100V-240V AC; 47-63Hz; 1.35A

Power supply

+12V, 3A; -12V 1A

Physical

Dimensions (w x h x d):

482.6mm x 88mm x 170mm deep, (2U 19” rackmounting)

Weight

3.12 kg net

View FileCloud DCM1e datasheet    Size: (652.8 KB)
View FileCloud General Brochure    Size: (4.53 MB)
Product video for Cloud DCM1e