+44(0)1663 767888

Details

The Ecler HUB1616 is a digital zone manager with 16 inputs and 16 outputs. It has the HANGAR embedded web-server application (control from standard web browser in Windows / MacOS, etc.) for its configuration; remote control from physical wall installation panels, call (paging) stations and applications for mobile devices (Android, iOS). Includes DSP with specific functions for both inputs and outputs.

The highly flexible HUB Series zone mixers are intuitive and easy to configure. Whether you are a novice or expert, you can set up a professional audio installation in a matter of minutes with the Plug & Play pre-configurations. It is the perfect solution for any type of sound that requires managing and controlling different zones. 


On the front panel, the zoner includes Power ON and Data status LEDs, outputs signal level indicator, monitor output jack and monitor level knob.

The power on switch can be found on the rear panel along with 2 analogue balanced (Euroblock connector) or unbalanced (RCA connectors) inputs, 2 unbalanced (RCA) line inputs, 4 balanced mic/line inputs, 2 pager RJ45 ports, phantom switch, 8 RJ45 remote inputs and 16 zone outputs (Euroblock connector). Also, a MUTE dry contact, RS-232 port (DB9 connector) and Ethernet RJ-45 port.

Features

  • 16 inputs, 16 outputs digital zoner with integrated DSP
  • Easy programming and control by embedded web application, HANGAR, and standard web browser
  • Control from the front panel and user remote control by:
    • eMCONTROL1 wall panels (up to 8)
    • eMPAGE paging consoles (up to 2)
    • Ecler pilot application, compatible with Android and iOS: control graphic panels set to user needs (pilot panels)
    • TP-NET protocol (RS-232 interface with DB9 connector) for control and integrating with third party systems
  • Control available, by zone (output): selection of audio source (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
  • Four priority levels, ducker/pager functions
  • Available DSP: frequency shifter, link stereo, delay, crossover filters, 8-band graphic EQ, compressor/limiter and much more
  • Predefined setups for a quick installation (plug and play)
  • MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect

Additional Information

Input 1, 2, 3, 4 (Line)

Sensitivity

+5 / -15dBV External potentiometer adjustment

Impedance

>13k

Input headroom

12dBV

Connector

RCA female with Euroblock stack

Type

Unbalanced

Input 5 ,6, 7, 8 (Mic/Line)

Sensitivity

+0 / -50dBV External potentiometer adjustment

Impedance

>24k electronically balanced

Input headroom

12dBV

Connector

Euroblock (Symmetrical)

Type

Balanced

Pagers

Input 7 and 8 (by RJ45 connector)

Phantom

+48VDC (rear panel switch)

CMRR

>60dB (20Hz - 20kHz)

Input 9 to 16 (Remote Input)

Sensitivity

0dBV without adjustment

Impedance

>24k electronically balanced

Input headroom

12dBV

Connector

RJ45 Connector

Type

Balanced

CMRR

>60dB (20Hz - 20kHz)

Outputs 1 to 16 (Line)

Max output level

12dBV

Connector

Euroblock 3-pin

Type

Balanced

Headphones output

Selectable output

From Out1 to Out16

Power

>200mW – 200Ω

Connector

Mini-Jack 3,5mm

General

External mute

Normally open. Assignable to any output zone

Frequency response

<10Hz ~ 20kHz (+0dB / -0.5dB)

Output noise floor (FFT)

>110dB (from 20Hz to 20kHz)

THD + Noise)

< 0.005% (1kHz, 1Vrms)

Crosstalk

>90dB, 20Hz - 20kHz

CMRR

>60 dB Typical

Flatness

Better than ±0.1dB


For more detailed specifications, please download the full datasheet.

View FileEcler HUB1408 & HUB1616 User Manual    Size: (1.77 MB)
View FileEcler HUB1616 Datasheet    Size: (730.9 KB)
View FileEcler HANGAR and PILOT App User Manual    Size: (2.54 MB)
Product video for Ecler HUB1616
we recommend
Ecler eMPAGE

Ecler eMPAGE

List price Ex. VAT: £489.00
Ecler eMCONTROL1

Ecler eMCONTROL1

List price Ex. VAT: £151.00
Ecler WPaMIX-T

Ecler WPaMIX-T

List price Ex. VAT: £120.00
   
upsell