+44(0)1663 767888

Details

The Australian Monitor MX82 is an 8 channel stereo audio mixer offers high quality audio performance and a wide array of features in a 1U rack mountable unit.

There are four mic/line inputs and four stereo inputs. Each of the four mic/line channels consists of a balanced XLR input switchable between mic and line level, 15dB of gain trim across the mic/line inputs plus individually switchable phantom power (15VDC). The first 4 channels also feature a line level direct output which can be used to feed additional amplifiers, mixers or recording devices. 

An internal dip switch on the MX82 allows the first 4 inputs to be routed to the direct output, the master outputs or both. You can also feed the optional tone generator to the direct outs if required. Input 1 can also be pre or post master if you require, allowing it to be used as a priority (or emergency) input. Inputs 5-8 are four dedicated stereo RCA aux/line level inputs.

Features
  • 4 XLR inputs switchable between microphone and line level, each with direct output
  • 4 stereo dual RCA line level inputs. Each input has front panel microphone/line switching (inputs1-4), treble and bass control, +/-15dB of gain trim and dual colour status LED indication
  • Single master volume control
  • Phantom power individually switchable for XLR inputs
  • Priority muting via optional muting modules
  • Optional remote VCA master and tone board

Additional Information

FREQUENCY RESPONSE 20Hz - 20kHz (+0,-3dB)
TOTAL HARMONIC DISTORTION < 0.1% @ 1kHz
SIGNAL TO NOISE RATIO

> 90dB (all pots at centre position)

 CROSSTALK  >70dB
 TONE CONTROLS: BASS @ 100HZ  +/- 12dB
 TONE CONTROLS: TREBLE @ 10KHZ  +/- 9dB
 SENSITIVITY (Trim in centre 0dB)  

Mic Sens 4.36mV, -45dBu Imp 1k3ohm
Line Sens 0.775V, 0dBu Imp >100k
RCA 200mV, -12dBu Imp 30kohm

 MAX LEVEL IN  

XLR mic -9dBu

XLR ine >30dBu

RCA >30dBu

 MAX LEVEL OUT  +27dBu
 PHANTOM POWER  15V DC
 MASTER OUTPUT  

Nominal Level 0dBu into 1kohm
Imp 100ohm

 MONO HEADPHONE OUT  

Nom -6dB into 200ohm
Imp 10ohm

 MONO REC OUT  

Nom -12dB into 10kohm
Imp 10kohm

CHANNEL DIRECT OUT

NOm 0dBu into 1kohm 
Imp 100 ohm 

 POWER INPUT  

AC: 230V/50Hz or 115V/60Hz, 3 pin IEC320-C14 connector;

 POWER CONSUMPTION (MAX)  7 VA
 DIMENSIONS H x W x D  

44mm x 482mm x 182mm
(1.75“x19”x7.2”)

 NET WEIGHT  2.8kg (6.2lb)
View FileAustralian Monitor MX82 Mixer    Size: (776.39 KB)
Product video for Australian Monitor MX82