Audio Technica U851R & U851RW

The Audio Technica U851R and U851RW is a phantom-powered boundary microphone featuring a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851R is equipped with self-contained electronics, eliminating the need for an external power module.

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • PivotPoint_ rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics eliminate need for external power module
  • Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Available in black (U851R) or white (U851RW)
List Ex VAT: £224.17
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Element

 Fixed-charge back plate, permanently polarized condenser

Polar Pattern

 Half-cardioid
(cardioid in hemisphere above mounting surface)

Frequency Response

 30-20,000 Hz

Low Frequency Roll Off

 80 Hz, 18 dB/octave

Open Circuit Sensitivity

 34 dB (19.9 mV) re 1V at 1 Pa

Impedance

 200 ohms

Maximum Input Sound Level

 134 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range

 108 dB, 1 kHz at Max SPL

Signal to Noise Ratio

 68 dB, 1 kHz at 1 Pa

Phantom Power Requirements

 11-52V DC, 4 mA typical

Switch

 Flat, roll-off

Weight

 9.2 oz (262 g)

Dimensions

 4.25" (108.0 mm) long, 3.31" (84.0 mm) maximum width, 0.91" (23.0 mm) height

Output Connector

 TB3M-type

Cable

 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors