+44(0)1663 767888

Ecler eMPAGE

16 zone paging station / microphone for Ecler HUB1408 / 1616 matrix mixer & MIMO Mixers.
List price Ex. VAT: £507.78


The Ecler eMPAGE desktop paging station is compatible with the ECLER HUB digital audio zoners (also compatible with MIMO88, MIMO88SG and MIMO1212SG matrixes). (The eMPAGE has replaced the MPAGE16)

With its buttons, LED indicators, electronic ink technology zone name display and gooseneck microphone, it is possible to select the destination zones for voice messages, find out if these zones are already controlled elsewhere, capture the voice message and send it in real time to the destination zones.

Key Features

  • 20 mechanical keys with integrated LED status indicator (paging zone selection management)
  • 1 mechanical key with adjacent LED indicator (message activation, PAGE key)
  • Electronic ink display (shows paging zone names)
  • Gooseneck microphone, with standard XLR connector
  • Management of up to 16 paging zones
  • RJ45 connector for single CAT5 or higher cabling (point-to-point), including power, audio output signal (picked up by the microphone) and digital control bus between the HUB unit and the eMPAGE station
  • Connector for backup power supply (optional)
  • Two eMPAGE units, with different or equal priority levels, can work simultaneously on the same HUB zoner
  • Programming of paging station(s) functionality from the web application embedded in the HUB: enabled paging zones, chime melodies, priorities, programmable keys, etc.

Additional Information

Audio + control connector

RJ45 remote port

Communication standard

RS485 and CAN, internally selectable by JUMPER

Microphone type

Removable gooseneck condenser microphone (eMCN1)

Microphone frequency response

50Hz – 18KHz (-10dB)

Polar pattern


Nominal power supply

From RJ45 remote input: 12VDC
From External Input: 24VDC


Green LED on All and Clear keys,
Bicolor LED on other keys

Output level

-5dBV @ 94dB SPL with ADJ MAX
-10dBV @ 94dB SPL with ADJ MID
-20dBV @ 94dB SPL with ADJ MIN
(with eMCN1 Mic)

Phantom Power

48VDC, always ON

Dimensions (microphone excluded)

150 x 50 x 180 mm



Accessories included

Windscreen for Microphone

View FileEcler eMPAGE Datasheet    Size: (1.08 MB)
View FileEcler eMPAGE User Manual    Size: (1.69 MB)
Product video for Ecler eMPAGE