Bosch Dicentis DCNM-WDE

The Bosch DCNM-WDE is a wireless device with enhanced features for use with the DICENTIS Wireless Conference System. The DCNMWDE enables participants to speak, register a request-to-speak, and listen to the speaker during a meeting via the built in loudspeaker or headphones.

This extended feature device has all the same facilities as the standard unit but with the added benefit of a touch capacitive 4:3 screen and the following:

  • Add customer logo in screen.
  • Speaker list.
  • Request list.
  • Identification functionality.
  • Future upgradable functionality.
  • Camera control.
  • Voting.
  • Logon identification.
  • Multiple languages.
  • Built‑in Near Field Communication (NFC) contactless tag reader to identify users.

The loudspeaker and microphone can be active at the same time for a face‑to‑face meeting experience. The sound is crystal‑clear due to a very high signal‑to‑noise ratio and smart frequency selection. To prevent acoustic feedback, a feedback suppressor is built‑in.

The device can be easily configured as a single-use, dual-use or chairperson Wireless Device via the web interface of the Wireless Access Point (DCNM-WAP).

General Features

  • Possible‑to‑speak and request‑to‑speak indication in microphone.
  • Single‑use, dual-use  or chairperson can be configured via the web interface.
  • Audio mute button.
  • Operating in the 2.4 GHz and 5 GHz (UNII1, 2 (extended) and 3) (license free) band.
  • Based on standard WiFi.
  • Seamless automatic frequency channel switching.
  • WiFi coverage area range test.
  • Packet Loss Concealment.
  • WPA2 encyption prevents eavesdropping and unauthorized access.

 

A socket is provided to connect the microphone either DCNM‑HDMIC, DCNM‑MICS or DCNM‑MICL, all available separately. 

Two headphone sockets and controls (on the left and right hand side) are provided to enable the unit to be used by 1 or 2 participants.

A lithium‑ion rechargeable battery pack (DCNM-WLIION) powers the device - it is simple and quick to change for maximum efficiency and the battery status and usage time is viewable via the web interface control. Not supplied - available separately, see related products.

 

List Ex VAT: £1,160.00
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Supply voltage (battery pack)

7.5 Vdc

Power consumption

4 W

Operating time DCNM-WD

> 24 hours (20% speech, 80% listening)

Operating time DCNM-WDE

> 20 hours (20% speech, 80% listening)

Frequency response

100 Hz – 20 kHz) (-3 dB at nominal level)

THD at nominal level

< 0.1 %

Dynamic range

> 90 dB

Signal‑to‑noise ratio

> 90 dB

Headphone load impedance

> 32 ohm <1k ohm

Headphone output power

15 mW

WIFI standard

IEEE 802.11n

Frequency Range

2.4 GHz and 5 GHz (ISM license free)

Nominal microphone input

80 dB SPL according IEC60914

Maximum microphone input

110 dB SPL according IEC60914

Loudspeaker nominal output

72 dB SPL at 0.5 m

Loudspeaker maximum output

80 dB SPL

Headphone nominal output

0 dBV

Headphone maximum output

3 dBV

Screen size

4.3 inch

Screen type

Capacitive multi-touch

Supported contactless NFC tag

According to: ISO/IEC14443 Type A
(from 106 kbps to 848 kbps. MIFARE 106kbps).

Mounting

Tabletop

Dimensions (H x W x D) without microphone

259 x 139 x 72 mm (10.2 X 5.5 x 2.8 in)

Weight: DCNM-WDE / DCNM-WDE + Battery Pack

670 g (1.47 lb) / 1131 g (2.49 lb)

Colour (top and base)

Traffic black (RAL 9017)

Operating temperature

5 ºC to +45 ºC(41 ºF to +113 ºF)

Storage temperature

-20 ºC to +70 ºC(-4 ºF to +158 ºF)

Relative humidity

< 95 %, > 5%

Related Products

Bosch Dicentis DCNM-WD

Wireless discussion device for Bosch Dicentis conference system.

see more
List Ex VAT: £868.00