Bosch PVA-2P500

The Bosch PAVIRO PVA-2P500 is a class D power amplifier for public address and voice alarm, certified to EN54-16 and offering 2 x 500 watts output power on 100 volt line.

The PVA 2P500 benefits from the lowest power consumption of any system in its class, minimising running costs and requiring fewer back-up batteries too.

The system is extremely flexible and allows architecture changes at any time during installation and has a wide range of announcement / music combinations.

Ideal for small to medium sized offices, regional airports, mid sized hotels, factories, schools and department stores.

It can be operated from both the mains and a DC supply. The output voltage is galvanically insulated and is constantly monitored for ground fault. An energy saving mode and temperature-controlled fans reduce energy consumption and noise levels. The control and monitoring functions are performed via CAN bus. This amplifier is designed for operation in an emergency evacuation system. The amplifiers are usually controlled via a controller and configured using IRISNet.

  • Floating 100 V or 70 V power outputs
  • High efficient amplifier blocks in class-D technology
  • Outputs idling and short circuit-protected
  • Mains operation 120–240 V (50/60 Hz) and/or 24 V DC emergency backup
  • Electronically balanced inputs
  • Temperature monitoring function
  • Pilot tone and ground fault monitoring function via PVA-4CR12 controller or PVA-4R24 router
  • Processor control of all functions
  • Monitoring of the processor system via watchdog circuit
  • Non-volatile FLASH memory for configuration data
  • Internal monitoring function
  • Integrated audio relays
  • Line monitoring function
100V Evac 2U
List Ex VAT: £2,200.00
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Rated load impedance (output power)

 

• 100 V 

20 Ω (500 W)

• 70 V

 10 Ω (500 W)

Rated output power, 1 kHz, THD ≤ 1%

2 ✕ 500 W1

Rated input voltage

 +6 dBu

Max. RMS voltage swing, 1 kHz, THD ≤ 1%, without load

• 100 V

 110 V

• 70 V 

78 V

Voltage gain, ref. 1 kHz, fixed

 

• 70 V 

33.2 dB

• 100 V 

36.2 dB

Maximum load capacitance

 2 μF

Input level, max. 

+18 dBu (9.75 Vrms)

Frequency response, ref. 1 kHz, rated load, -3 dB

50 Hz to 25 kHz

Input impedance, active balanced 

20 kΩ

Signal-to-noise ratio (A-weighted)

 > 104 dB

Output noise (A-weighted) 

< -62 dBu

Crosstalk , ref. 1 kHz

 < -85 dB

Output stage topology

 Class-D, transformer, floating

Power requirements

 

• AC 

115–240 V (-10/+10%)2

• DC 

21‑32 V

Power consumption, AC and DC 

See section “Power consumption” in operation manual

Inrush current 

2A

Inrush current, after five-second power cycle

1.3A

Mains fuse 

T6.3A (internally)

DC fuse 

30A (internally)

Ground fault 

R < 50 kΩ

CAN BUS port

 2 ✕ RJ-45, 10 to 500 kbit/s

Protection 

Audio input level limiter, RMS output power limiter,
high temperature, DC, short circuit,
mains undervoltage protection,
DC supply undervoltage protection,
inrush current limiter, ground fault

Cooling 

Front-to-rear, temperature controlled fans

Operating temperature 

-5 °C to +45 °C

Safety class 

Class I

Electromagnetic environment

 E1, E2, E3

Product dimensions (W ✕ H ✕ D)

19”, 2 HU, 483 ✕ 88.2 ✕ 391mm

Net Weight

16.5kg

Related Products

Bosch PVA-4CR12

Voice alarm controller and central paging manager for the PAVIRO system.

see more
List Ex VAT: £1,850.00
Bosch PVA-20CSE

Call station extension for the PAVIRO system. Adds a further 20 programmable function keys.

see more
List Ex VAT: £359.00
Bosch PVA-4R24

Voice alarm router for the PAVIRO system. For routing up to 24 zones.

see more
List Ex VAT: £1,620.00
Bosch PVA-15CST

Microphone call station for the PAVIRO system.

see more
List Ex VAT: £597.00
Bosch PVA-1WEOL

End of line slave module for the PAVIRO system.

see more
List Ex VAT: £102.00
Bosch PVA-CSK

Call station kit for the PAVIRO voice alarm system.

see more
List Ex VAT: £898.00