SigNET APL

SigNET APL Line level audio input Outreach plate fitted with 2 x phono input sockets.

The APL forms part of the SigNET range of Outreach plates which can be used to extend the functionality of your induction loop system.

Mountable on 25mm back boxes, each plate features a built-in mixer, pre-amp, input level control and balanced output. Fitting at the most convenient point on an installation overcomes the need for long and potentially hazardous microphone/audio leads.

Typically, up to 10 Outreach plates (any mix) can be daisy-chained to one balanced line level input with cable lengths of up to 100m easily achievable using standard two-pair audio cable with no recognisable degradation of audio signal quality. 

  • Accepts 2 line level signals (stereo source TV, CD etc)
  • 2 phono (RCA) input sockets
  • On-board mono converter
  • Standard single gang electrical face plate
  • Mounts on a 25mm standard UK single gang back box

Each outreach plate requires four wires, two balanced line (A +, A –), one ground (0V) and one power connection (12-32 V DC regulated). 

List Ex VAT: £31.50
Log in for Trade Prices
CONTACT US

SPECIFICATIONS

Power requirements

Supply volts: 12-32V regulated d.c.; Supply current: 12-15mA.

Controls

Adjust input level.

Input signal level

-12dBv to +6dBv.

Gain

+6dB.

Level control

-30dBv to +6dBv

Input impedance

Greater than 10K.

Phantom volts

N/A.

Signal to noise ratio

Greater than 95dB.

THD + noise

Less than 0.01%

Product dimensions (mm)

W 85 x H 85 x 15 D mm. Mount on a standard 25mm single gang UK back box.

Construction & finish

Plastic.

IP Rating

IP20.

Weight

TBC.

Operating conditions/temperature

-5ºC to +40ºC. Max relative humidity: 95%.

Related Products

Signet APM

Omni-directional electret plated microphone, for induction loop systems. For wall, desk or ceiling.

see more
List Ex VAT: £35.31
Signet APXM

Wall mounted XLR mic socket plate for induction loop systems.

see more
List Ex VAT: £36.29
Signet APQM

6.35mm socket plate for microphones for induction loop systems.

see more
List Ex VAT: £32.81
Signet APJ

Wall mounted microphone connection plate with 3.5mm jack input. For induction loop systems.

see more
List Ex VAT: £31.50
Signet APXL

Line level audio input plate with 3 pin XLR socket. For induction loop systems.

see more
List Ex VAT: £34.15
Signet APQL

Line level, 6.3mm jack, audio input plate. For induction loop systems.

see more
List Ex VAT: £32.81
Signet API

Illuminated loop active indicator plate; shows when an induction loop system is active.

see more
List Ex VAT: £31.50
Signet APV

12V power supply for Signet outreach plates used in induction loop systems.

see more
List Ex VAT: £61.19