For over 25 years, the groundbreaking NEXO PS Series has enjoyed industry standard status as the point source loudspeaker of choice in high end installations around the world. Now the ePS Series builds on the PS platform to create a new, ‘no frills’, IP55-rated loudspeaker range that makes legendary NEXO engineering and performance accessible to a wider range of projects.

An extensive range of cabinet fittings are provided for mounting and rigging hardware. Two M6 with 80mm pitch and one M10 fitting on the cabinet sides allow connection to U Bracket, bumper or eye bolts. The back of each speaker is fitted with 3x M6 with 70mm pitch for wall mounting in both horizontal and vertical positions.

The cabinets are finished in black structural paint with a UV-resistant acoustic fabric stretched over the protective front grille and all ePS models are minimally fitted with a hard-wired strip for connection, offering generic 2 x 7 mm pitch IN/OUT screw connectors. The included IP cover protects the connectors from moisture in outdoor applications.

A rotatable asymmetric horn ensures optimum directivity for every installation.

Dedicated eLS400, eLS600 and eLS18 subwoofers extend ePS system LF response down to 45, 40 and 32Hz respectively. Each rugged, bass reflex design sub is constructed from 15mm birch plywood finished with a polyurethane coating and fitted with a high excursion driver. The eLS400 (12”) is designed to partner the ePS6 and ePS8, the eLS600 (15”) partners the ePS8 and ePS10 and the eLS18 (18”) partners the ePS12. Custom accessories enable the ePS cabinets to be mounted below the subwoofers to create a small footprint wideband system.

GREAT SOUND FOR THE GREAT OUTDOORS
Building on the ePS series is ePS Outdoor - a range of four weatherproof cabinet loudspeakers engineered and tested for use in demanding outdoor installations.
ePS Outdoor loudspeakers not only exceed the requirements of EN54-24 certification but have been further developed and tested to ensure consistent performance and long product life, even in the most severe conditions. From the use of high-grade A4 stainless-steel screws to UV-protected cloth and polyurethane coatings, every detail has been considered and the final designs have been subjected to 800 hours of salt spray testing (ISO 9227 standard) and 600 hours UV testing (DIN 75220 standard).